The general mining crusher has "jaw crusher, hammer crusher, roll crusher, compound crusher, impact crusher, impact crusher, ring hammer crusher, cone crusher, mobile crusher, etc."
First, the start of the crusher:
a. After inspection, it can be started only after it is proved that the machine and transmission parts are in normal condition.
b. The machine is only allowed to start under no load condition.
c. There should be a signal in advance when starting: when there is an abnormal phenomenon found after starting, it should stop starting immediately, and the crusher can be started again only after the cause must be identified and the abnormality eliminated.
Second, the use of crusher
Feeding can only start after the crusher is running normally.
Third, safety and operating procedures
The operator must be educated in safety technology before he can operate the machine
1. It is strictly forbidden to peep into the machine from the upper part of the crushing chamber during operation.
2. The electrical equipment should be grounded, and the wires should be insulated and reliably insulated and laid in the steel pipe.
3. It is strictly forbidden to move materials directly in the crushing chamber behind the feed port during operation.
4. It is strictly forbidden to make any adjustment, cleaning or maintenance work during the operation of the crusher.
