The hammer crusher components in a working machine have to behave as one system: the rotor delivers the blow, the grate decides which particles leave the chamber, and the liners take the punishment of everything that does not. YDL casts and machines the wear-critical components of a crusher in its own foundry - hammers, hammer pins, rotor discs, main shafts, breaker plates, liner plates and grate bars - and supplies them against your machine drawings rather than as generic stock parts. Nothing is treated as an afterthought: bore sizes, pin diameters, plate thickness and clearances are checked together so a rebuilt chamber runs true. We serve operators replacing parts on an existing mill and OEM builders needing a stable casting source, in full sets or single pieces.

Product feature
- Supply at Component Level: Every wear-critical part is available on its own or as a matched kit, so you buy the liner that failed, not a whole assembly.
- Rotor Kept True: Main shafts, discs, pins and lock nuts are machined as a set, with evenly indexed pin holes and end fixings that stop axial movement, so the rotor stays balanced after a rebuild.
- Grate Bars Set the Product: The grate is the final word on particle size and throughput. Bar spacing and slot profile are cast to your target output, with uniform sections to avoid uneven discharge.
- Chamber Liners Absorb the Rest: Breaker plates and side liners shield the casing from rebound and abrasive flow, shaped to keep the impact zone working instead of wearing a hole in the frame.
- Matched Wear Life: Harder is not always better: a hammer that outlasts the grate three times over wastes money. We size material grades across the set so the parts reach their service limit together.
- Interchangeable Against Drawings: Parts are made to your drawing set or a measured sample, so a replacement drops into an existing machine without rework on site.

Product application
- Crusher Rebuild and Overhaul: During a planned shutdown the chamber is stripped and renewed, with hammers, pins, grate bars and liners arriving as one matched kit.
- Quarry and Aggregate Lines: Primary and secondary hammer stations need predictable part consumption, so liners and grates are scheduled by tonnage rather than by breakdown.
- Cement and Lime Plants: Limestone and clinker duty is abrasive and hot; breaker plates and grate bars are specified for thermal stability alongside the hammers.
- Coal Handling and Power Stations: Ring hammer stations in coal yards run continuously, so pin and disc wear is watched as closely as hammer tip wear.
- Mobile Stations and Recycling: Tracked units move between sites; a compact spare kit of hammers, pins and a spare grate keeps a mobile plant producing without a workshop.

Product qualification


FAQ
Q: Which parts of a hammer crusher are consumables?
A: Hammers, pins, grate bars, breaker plates and liners are regular wear items; discs, shafts and bearings last far longer but are inspected at every rebuild.
Q: Output has gone coarse - hammer or grate?
A: Check the hammer ends first: rounded tips crush less and let oversize through. If tips are still square, worn or broken grate bars are usually the cause.
Q: Can I buy components without buying a machine?
A: Yes. We supply parts to operators and to OEM builders, in single pieces or full kits, on a drawing or sample basis.
Q: How do you guarantee the parts will fit?
A: We confirm bore, thickness, width, mass and mounting detail before casting, and match the batch to the approved sample.
Hot Tags: hammer crusher components, China hammer crusher components manufacturers, suppliers, factory, components of a hammer mill, Crusher Hammer Shaft, crusher parts, Hammer Of Crusher, hammer shaft of hammer crusher, manganese liners













