Stone Crusher Hammer
video
Stone Crusher Hammer

Stone Crusher Hammer

A stone crusher hammer faces a wider range of working conditions than almost any other wear part, because stone itself varies enormously: limestone and shale break with a soft, crushing action, while granite, basalt and quartzite grind the hammer down by pure abrasion. YDL casts stone crusher hammers in grades chosen for that difference, not one universal part.
Send Inquiry
Description

A stone crusher hammer faces a wider range of working conditions than almost any other wear part, because stone itself varies enormously: limestone and shale break with a soft, crushing action, while granite, basalt and quartzite grind the hammer down by pure abrasion. YDL casts stone crusher hammers in grades chosen for that difference, not one universal part. The working face is high-chromium iron for abrasive rock, or a bimetal composite joining a hardened edge to a shock-resistant body for mixed feed, poured in our own foundry and heat-treated under controlled cycles. We match thickness, working profile, bore size and unit weight to your rotor and feed size, so the hammer takes the impact it is meant to and wears evenly. Parts fit PC, PCZ and PCH stations and custom OEM rotors.

 

product-1-1

 

Product feature


 

 

  • Grade Selected by Rock Type: Hard rock such as granite and basalt is a wear problem; limestone and shale are an impact problem. We recommend the grade from your rock, not a catalogue default.
  • Hard Face, Tough Body: Bimetal hammers carry a high-chromium working edge over a low-alloy, tempered body, so the tip resists abrasion while the shank survives tramp metal.
  • Profile Matched to Feed Size: Coarse feed needs a heavier hammer for impact energy; fine reduction suits a slimmer profile. We size the section to the duty so bearings are not overloaded.
  • Controlled Heat Treatment: Quenching and tempering are logged by batch, giving a working face in the 60 HRC range with enough residual toughness to resist chipping.
  • Sound Castings, No Hidden Defects: Melt cleanliness, feeding and riser design are controlled to avoid shrinkage porosity and slag inclusion, the usual cause of a hammer snapping mid-life.
  • Weight and Fit Balanced: Bore, pin diameter and unit mass are held to drawing, so a replacement set keeps the rotor balanced.

 

image007

 

Product application

 

  • Limestone Quarries and Cement Raw Meal: Soft to medium limestone crushes by impact; hammers here are chosen for toughness and a clean working edge that holds output size.
  • Granite and Basalt Aggregate Lines: Hard abrasive rock removes metal by grinding, so high-chromium faces are specified and the wear pattern is checked by crushed tonnage.
  • Dimension Stone and Crushed Stone Plants: Mixed quarry run to sized stone calls for a bimetal grade that tolerates occasional oversize blocks.
  • Mining and Ore Primary Crushing: Iron and copper ore duty is severe; selection follows the ore test rather than a fixed grade.

 

product-1-1

 

Product qualification

 

5

6

 

FAQ

Q: Which hammer grade suits granite and basalt?

A: Abrasive hard rock removes metal by grinding, so a high-chromium working face gives the longest life. Bimetal is the fallback where feed includes occasional oversize blocks.

Q: Why do hammers last so much longer in one quarry than another?

A: Life follows rock abrasiveness and feed grading, not machine hours. Silica content, moisture and oversize all change wear rate widely.

Q: What causes a hammer to break rather than wear out?

A: Usually internal porosity, an over-hard case, or tramp metal and oversize blocks entering the chamber. Correct casting soundness and feed control prevent most breakages.

Q: Can you match a specific crusher model?

A: Yes. Send the model, a drawing or a worn sample with bore and thickness measured, and we confirm the fit before casting.

 

Hot Tags: stone crusher hammer, China stone crusher hammer manufacturers, suppliers, factory, components of a hammer mill, hammer crusher parts, liner, liner plate, manganese liners, used crusher parts

Send Inquiry

(0/10)

clearall